Futech Para DS slope laser set

The Futech PARA DS is a very comprehensive and multifunctional construction laser with remote control. This eliminates the need to walk back to the laser to change settings, or to turn it on or off.
Like its predecessor, it is suitable for horizontal, vertical and double digital grade work. The revamp also adds additional features such as higher speed for kilving and a “Wind” function! The new design also improves the robustness of the construction laser and it is now equipped with a Lithium Ion Battery!

Digital Abortion:

The PARA DS is a comprehensive digital double-slope laser. Via the large illuminated LCD screen on the laser or with the supplied remote control, the PARA DS can be adjusted in percent shear in two axes. This can be done up to a maximum of 10% in the X and Y axes and to two decimal places (00.00%).
This allows the PARA DS to set a very precise slope which amounts to an adjustable slope of 1mm per meter!

WIND function:

The PARA DS now has a WIND function in addition to a TILT function. With TILT, the construction laser stops rotating at the slightest movement, preventing measurement errors. The WIND function works the opposite way: When the PARA DS is in the WIND mode, it continues to work in case of vibrations from passing machines, gusts of wind on the construction site or even if it is accidentally bumped into. Ideal for a busy construction site!

Side shutdown:

Side switch-off is a function that is normally only used with very expensive lasers. Using software, the function does not project the laser beam on one or more selected sides to prevent reflection in, for example, windows.
FUTECH has found an efficient solution with shadow clips in the new PARA DS. These caps can be placed in front of the desired window to block the laser beam.

RPM:

Only a few rotating lasers have speeds higher than the most common 600rpm, as is the case with the new PARA DS. It has a speed of 800 rotations per minute! A higher speed actually provides the correct height more often per minute, thus allowing more precise work.

Robust:

The Futech PARA DS is very robust with its newly designed housing. The very high IP65 value contributes to this and is by far one of the highest compared to the competition. The IP65 value stands for “dust-free” and “rainwater proof.” The four handles, together with the solid aluminum top, provide complete all-round protection. The PARA DS also comes in a heavy duty case full of thick foam!

Features and specifications:

• – Up to 2x300m range (with receiver)
• – Up to 40 hours of operation per charge
• – IP65 dust and rainproof
• – Self-leveling
• – Class 2- 635nm 1mW laser
• – Very complete delivery including rugged case, remote control, Para mm receiver, staff clamp, goggles, target plates, anti-reflective clips, charger

Optionally, a 1.65m Heavy duty aluminum tripod can be selected, and a VMG aluminum height bar.

The Laser is factory calibrated by default. However, if there is a need for a new calibration, you can return it to FUTECH for a free calibration. This only applies if you are registered and there is a QR code on the box.